Reg63 ”DAC Channel Volume Control's Soft-Step control”...Soft-Stepping is 1 step per 1 or 2 DAC Word Clock I would like to check whether there is any pop noise when switching from maximum volume to ...

I met the similar problem when using ads1274EVM-PDK, And of course, the USB device was enumenated under NI-VISA USB Devices: My PC is Windows 10 64 bit. In C:\Program Files (x86)\ADCPro\drivers ...

I am looking for software help on a CAN interface that is on the TI CP3UB26 microcontroller as well as on the NatSemi/TI CR16 family. Does TI have any software drivers for this CAN peripheral? Thank ...

I'm using CC2340R5-Q1 MCU and SDK simplelink_lowpower_f3_sdk_8_10_01_02. I use the basic_ble project and integrate i2ctarget into it. If I2C receives I2C data, it ...

We use gmake tool to build our AM62Ax project in windows operation system, sometimes the compiler report error log as the screenshot show,but if we try to rebuild the ...

we use the LM5164 chip on many electronic boards and we are very satisfied. I noticed that typically the impedance of the VIN pin (referred to the GND pin) is around 9MΩ. The measurement is made with ...

I designed an AC/DC converter using TIDRF62 as a reference. The TIDRF62 uses Wuerth 750314727 however one was not available when I made my design and I used a Myrra 74080. The main difference between ...

The difference between case 1 and case 2 with open circuit output lies in whether the output capacitance is large or small. How to determine whether the output capacitance is large or small, and is ...

I modified the configuration of a customer board based on the AM62x-evm, and the image and sdk can be successfully compiled through the command. $ MACHINE=am62xx-customer bitbake tisdk-customer-image ...

The IIC Buck Boost raises the battery voltage to between 0 and 20+V (in steps) and then supplies it to a push-pull stage. This stage, through transformer isolation, boosts the voltage to between 0 and ...

Order of millivolts output swing to be fed into an ADC I'm using currently using TINA-TI to simulate the TIA, with the ultimate goal of producing a tangible physical version of the circuit in the ...

We upgrade our design to use 8 Giga Bytes of DDR4 using 2 Micron chip MT40A4G8NEA-062E:F. I used the SDK 09.02 and sysconfig tools online. Our DDR4 chip are wired with 1 chip select. 1 - Do I need to ...